Wind Power Technology - Education
A great source of renewable, clean energy is utilizing wind power technology. For generating electricity it harnesses windpower. Think of a large windmill looking device or wind turbine that spins as the wind blows through it. On the surface it may be slowly spinning but inside through a technology of interconnected gears are smaller gears spinning at a much faster rate. Electricity is generated as these smaller gears spin. This electrical power can be stored in a battery or connected to a local power grid, to be distributed into homes in the community. This illustrates the basic concept behind a wind power technology powered community. Wind Turbines Defined Wind turbines are the primary equipment necessary for wind power technology. These modern day windmills can be seen in many areas across the country, and across the world, as well. Typically painted a grey color to blend in against the sky, these towers almost always have a three-bladed fan, which is pointed into the wind by computer software. Wind power technology via wind turbines can be used to produce a commercial amount of energy, and is often used in conjunction with engineerng other energy producing fuels to power cities across the country. Wind turbines can be found off-shore, as well; as it is much easier to produce wind power technology using the stronger winds that come from across the waters. These winds are stronger due to the large, flat expanse of seas and oceans, which provide little or no resistance to the wind. Rural Communities Using Wind Power Technology Wind power technology is also being

Are We Throwing America Away?
<p>Dan Chiras questions the idea that disposable items are worth the tremendous waste they create.</p>
Heating With Wood: Why Wood Heat Is Renewable Energy
A leading wood-heat expert explains why wood is an essential energy resource. This article includes the latest information on EPA-certified woodstoves and why they should be considered a responsible choice for home heating. Wood is a renewable resource, and wood as a fuel is 75 percent CO2 neutral, making it a good choice for home heating in areas where wood is readily available.
Building SIPsmart: Considering Concrete and Solar Hot Water
<p>Michael Morley will post regular updates about his progress building a unique green home with structural insulated panels (SIPs). Here, he discusses options for installing a colored concrete floor, and considering whether to install a solar hot water system.</p>
U.S. Wind Energy Potential Is Three Times Higher Than Previously Estimated
<p>New estimates for wind energy potential are blowing us away! The United States has the potential to create nine times as much energy by wind annually as was created by all energy sources combined in 2009.</p>
The Geothermal Energy Future Looks Bright
<p>U.S. geothermal energy capacity grew 6 percent in 2009, and there are many more projects on the horizon.</p>
U.S. Wind Energy Industry Soared in 2009
<p> Wind capacity went up 39 percent in 2009 in the United States, and rose 31 percent globally.</p>
Biofuel Production Gets a Boost
<p>Thanks to action steps laid out this month by President Obama, U.S. biofuel production is set to undergo both short- and long-term growth.</p>
Nuclear Power and the Lobbyists Behind It
<p>Is nuclear power a green choice? Well, if by green you mean money, it appears to be tinted quite green. Read about a new investigation that traces millions of dollars the nuclear industry has spent over the past decade to sell the public and Congress on the virtues of new reactors.</p>
Nuclear Energy: Let's Not Repeat Our Mistakes
<p>Renewable energy expert Dan Chiras warns us that building nuclear power plants is not the solution to our current energy crisis.</p>
Share Your Thoughts on Woodstoves
<p>Do you have a woodstove or pellet stove at home? We'd like to hear more about your experiences with woodstoves and any tips you may have for heating with wood.</p>

used in rural communities, where it is not possible to have access to the larger commercial energy producers. Rural wind power technology is typically created using smaller and more modern versions of old fashioned windmills. These rural windmills were originally created to be used in Australia, where the vast expanses of farmland made it virtually impossible for commercial energy sources to reach. They were then used by rural American farmers to pump water and produce wind power technology for electricity in small, rural towns. The idea of utilizing this technolgy that power’s a remote area is and has been very useful. Conclusion Despite the apparent benefits from using wind power that have been illustrated in this article wind power technology is by far the costliest source of renewable energy. This is because of the high initial start-up cost associated with building and implementing all of the necessary equipment. There are three points which still make this a viable alternative energy. 1) Commercial progress is being made toward finding a way to make wind power technology available nationwide at a reasonable cost. 2) Costs are lowering as more research is performed. 3) New sources of technological based funding are being discovered. The technologies for engineering and building your own wind power source are freely available. They don’t require a high technical skill but there are some aspects that may require an expert. You can find instructions on how to construct your own wind power technology energy source in many places offline and on.